PUMP STATION TELEMETRY
We offer full monitoring on our cloud based GSM system, we can monitor pumping stations for, mains power failure, high level alarm, pump tripped, seal leak (if applicable) and additional features if allowed. We can also see if any of the inputs have changed state, for example, if the mains power failed then we can see if and when it was restored potentially saving on costly unnecessary call-out charges. These units are rented out on a annual basis alongside our annual service contracts. installation is subject to site visit to ensure suitability and network coverage, these units can be provided with roaming sim cards and will pick up on the strongest network available at any given time. Standard units will be provided with a single carrier but can be upgraded for a small fee and is advisable in critical areas.
OIL SEPARATORS, SILT TRAPS & RAINWATER HARVESTING TANKS
Our standard GSM unit can monitor 8x digital inputs N/O/N/C plus power failure to the unit, we can configure alarms for any of the inputs or use them for monitoring, for example pump running/pump not running. The unit can be used to send txt messages for alarms if necessary however we monitor all units through an online portal. We typically use one of the 2 relay outputs to cancel the common panel mounted alarm, this has been proven to be useful in unmanned residential applications.
Not Interested in fancy GSM telemetry units? We also offer external beacons and remote alarm/repeater panels to make sure any alarm you may have will be seen and heard.
EVERYTHING ELSE
In fact, we can monitor anything with N/O or N/C contacts - for example: pressure switches, door switches, alarm systems, man on site switches and much more...
We also have 2x output relays - so we can control things such as resets where applicable.
Interested? Then give us a call or email through our contact us page.
PUMP STATION TELEMETRY
We offer full monitoring on our cloud based GSM system, we can monitor pumping stations for, mains power failure, high level alarm, pump tripped, seal leak (if applicable) and additional features if allowed. We can also see if any of the inputs have changed state, for example, if the mains power failed then we can see if and when it was restored potentially saving on costly unnecessary call-out charges. These units are rented out on a annual basis alongside our annual service contracts. installation is subject to site visit to ensure suitability and network coverage, these units can be provided with roaming sim cards and will pick up on the strongest network available at any given time. Standard units will be provided with a single carrier but can be upgraded for a small fee and is advisable in critical areas.
OIL SEPARATORS, SILT TRAPS & RAINWATER HARVESTING TANKS
Our standard GSM unit can monitor 8x digital inputs N/O/N/C plus power failure to the unit, we can configure alarms for any of the inputs or use them for monitoring, for example pump running/pump not running. The unit can be used to send txt messages for alarms if necessary however we monitor all units through an online portal. We typically use one of the 2 relay outputs to cancel the common panel mounted alarm, this has been proven to be useful in unmanned residential applications.
Not Interested in fancy GSM telemetry units? We also offer external beacons and remote alarm/repeater panels to make sure any alarm you may have will be seen and heard.
EVERYTHING ELSE
In fact, we can monitor anything with N/O or N/C contacts - for example: pressure switches, door switches, alarm systems, man on site switches and much more...
We also have 2x output relays - so we can control things such as resets where applicable.
Interested? Then give us a call or email through our contact us page.